PVC windows TITAN
DIN EN 1627 ff – RC1
The glazing beads should be secured according to
requirements (e.g. by screw connecons, adhesive
bonding, etc.) or the laminated safety glass pane must
be bonded in the rebate.
The cavity dimension which is specified in the SIEGENIA
profile datasheet for the corresponding plasc profile
system must be adhered to.
It must not be exceeded, nor must it fall below the
Striker plates and lt lock bearings
The S-RS striker plates must be posioned in such a
way that the locking cams catch in the striker plates as
much as possible.
The screw length must be selected so that the S-RS
striker plates and lt lock bearings are screwed into
two walls if possible.
If it is possible to screw into steel bracings, selfdrilling
screws with Ø 3.9 mm should be used. The length must
be selected so that the screws can be screwed into the
bracing by 8 to 10 mm.
If a frame groove is available, it should be sealed with a
To prevent the sash profile from moving in the glazing
rebate, the glass pane must also be set with blocks
close to the security latching posions (distance
The cavity between the frame and the brickwork
near the locking points must be back-filled to be
When fixing the window elements, special steps must
be taken with regard to the distance between fixing
Secured glazing bead
S-RS striker plate
H45.TITA000S005EN-00 1 - 13